photo Contributor1.png

Sunday, September 9, 2012

Tiny DAC, Big Sound – Impression of Stoner Acoustics UD100 vs. ODAC

Stoner Acoustics is a fairly new start up by a DIY’er that has been pretty active in the local (Malaysia) audiophile community. By no mean his first project, the UD100 is however his first commercial product under the new company and it is aimed to deliver maximum bang for the buck sound quality with a minimalistic design for US$49 / RM138







Spec
TI PCM2706 (USB receiver) + ESS Sabre ES9023 (DAC)
Bit depth / Sampling Rate (max): 16bit / 48kHz
Output: 2Vrms line-out via 3.5mm stereo plug


ES9023


PCM2706

Build Quality

Okay, there is no housing on this tiny USB DAC. It would seem the production isn’t large enough to call for a plastic injection mold to be made (those things can be very expensive). Otherwise, the USB DAC is very well made. All the soldering points look to be quite solid.

For the worrying type, a simple heat shrink seem to suffice to shield the components from dust and direct moisture. If you are the handy DIY type, you can get a $1 TF card reader from eBay, take the inner out, drill a hole on the side and fit the USB DAC into it (see pictures blow).

Note that UD100 is just a USB DAC without any amp section, so you will need to supply your own amp if you want to use it. It doesn’t support Windows volume control as well, so it will be wise not to plug your headphone into its 3.5mm directly.


A $1 TF card reader from eBay disassembled, next to UD100. See the similarity in size.


UD100 in the TF card reader case.

Sound Quality
At first, I am a bit skeptical about the overall SQ of the UD100. I can understand it could be better than most of the PCM270x+WM8740 variance that I own, based on my ownership of the ODAC and the experience of the ESS Sabre chip. However, given its miniature size and what seems to be the missing of many components, I really thought this is just going to be an obvious step-down from the ODAC. Well, I was wrong.

The first thing I did when I received the UD100 is to measure it via RMAA. The setup is as followed: PC -> USD BAC -> O2 -> Behringer UCA222 (USB Isolated). Since UD100 only supports sampling rate of 16/48 max due to its USB receiver, both UD100 and ODAC are measured under 16/44.1 condition. As UD100 doesn’t support software volume control, I have to put the O2 in between the DAC and the UCA222. It shouldn’t affect the comparison though, since whatever effect it might have will be applied to both DAC, and I am only interested in the difference between the DAC. Surprisingly, the result is so close that the tiny bit of difference are either within a dB or two of each other or well under 0.1%. In fact, UD100 measured just a tiny bit better in most case, plus a slightly flatter and more extended frequency response over 18kHz. On a separated test, I also confirmed UD100, like ODAC, is outputting 2Vrms on its line-out that is default of the ESS chip.

As far as subjective listening goes, I compared both UD100 and ODAC feeding to O2 and a couple of IEM. All and all, I have a hard time trying to find a difference between the two USB DAC. Whatever difference I think I have heard is too small to say in certainty that they are not just in my brain. They are both clean, neutral with a good soundstage. At time, I can tell UD100 sounds just a little more crisp on certain instruments or ODAC gives just a little lusher detail, but they aren’t night and day. I think the reality is, it would have been even tougher to actually tell the two USB DAC apart during a blind listening. It that a good thing? I supposed so. I like my ODAC from JDS Labs. It is very well built and sounds great for the price. But for 1/3 of the price and almost just as good a sound, I can’t fault UD100 at all. Once I housed it in a $1 mod’ed TF card reader case, it looks and functions almost perfectly.


ODAC (top) vs. UD100 (bottom)

Verdict
UD100 truly exceeds my expectation on how good a tiny sized USB DAC can sound. It is the poor-man’s ODAC, so to speak. While it doesn’t support 24/96 like the ODAC, it shouldn’t matter to those who don’t have any HD music files. For those who are looking for either big bang for the buck or just something simple to feed into your amp, I couldn’t recommend this tiny USB DAC enough.

A thank to Stoner Acoustics for the UD100 sample.

Disclaimer: All trademarks and logos in the website belong to their respective owners. Beside getting free review samples, I don't work for or get paid by anyone to write anything on this website, or anywhere else in that matter. Also, free review samples are never sold for any financial gain. I do buy gears and review them, but for simplicity you (the reader) should always assume what I review is free sample in nature (and thus comes with all the bias). The website does have Google Ads and Amazon Associates enabled (which I have no direct control over their content) - though I don't write review for a living, nor does the ads generates enough money to cover my breakfast (in fact, not even one breakfast per week). Listening to music and playing with audio gears are purely hobby for me. In short, I am just an audiophiles who happens to have his own blog. Not a journalist who happens to be an audiophile. Oh, and excuse my writing as I am not a native English speaker and can't afford a proofreader. Also, just because I don't write in a negative tone doesn't mean I don't write down the negative aspect of a gear. Please read them carefully. Last but not least, please note that this site uses cookies to track visitors' number and page view.

Important: All postings are my own personal opinion only and should not be treated as absolute truth. I do get things wrong just like everyone else. Always do your own research!

Lastest Posts

 
Copyright 2008-2016 In Ear Matters. Powered by Blogger Blogger Templates create by Deluxe Templates. WP by Masterplan